H12-831_V1.0 echter Test & H12-831_V1.0 sicherlich-zu-bestehen & H12-831_V1.0 Testguide

Auf unterschiedliche Art und Weise kann man verschiedene Zwecke erfüllen. Was wichtig ist, dass man welchen Weg einschlägt. Viele Leute beteiligen sich an der Huawei H12-831_V1.0 Zertifizierungsprüfung, um seine Lebens-und Arbeitsumstände zu verbessern. Wie alle wissen, dass es nicht so leicht ist, die Huawei H12-831_V1.0 (HCIP-Datacom-Advanced Routing & Switching Technology V1.0) Zertifizierungsprüfung zu bestehen. Für die Prüfung verwendet man viel Energie und Zeit. Traurigerweise haben sie die Huawei H12-831_V1.0 Prüfung noch nicht bestanden.

Die Prüfung ist dafür konzipiert, eine breite Palette von Themen im Zusammenhang mit dem Bereich Datacom-Advanced Routing and Switching Technology abzudecken. Einige der Themen, die in der Prüfung behandelt werden, umfassen fortschrittliche Routing-Technologien, VPN-Technologien, MPLS-Technologien, IPv6-Technologien, BGP-Technologien und Netzwerk-Sicherheitstechnologien. Die Prüfung deckt auch praktische Szenarien und Beispiele aus der realen Welt ab, um sicherzustellen, dass Kandidaten ihr Wissen in realen Situationen anwenden können.

>> H12-831_V1.0 German <<

H12-831_V1.0 Online Prüfungen, H12-831_V1.0 Fragen&Antworten

Huawei H12-831_V1.0 Zertifizierungsprüfung sowie Cisco, IBM, HP Prüfungen sind jetzt sehr populär. Wenn Sie die Huawei H12-831_V1.0 Zertifizierung bekommen wollen, realisieren die Huawei H12-831_V1.0 Dumps von Zertpruefung Ihren Wunsch. Nach dem Erfolg der Huawei H12-831_V1.0 Zertifizierung können Sie auch andere IT-Zertifizierungsprüfungen ablegen. Es gibt keine Probleme für alle Huawei Prüfungen, wenn Sie Prüfungsfragen und Antworten von besitzen.

Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 H12-831_V1.0 Prüfungsfragen mit Lösungen (Q63-Q68):

63. Frage
As shown in the figure, SF is enabled on all interfaces of the router, the cost value of the link is marked in the figure, and the Loopback0 interface of R2 is advertised in area 1, then the cost value of R1 reaching 10.0.2.2/32 is?

A. 0
B. 1
C. 2
D. 3

Antwort: A

64. Frage
The path that IP packets pass through on an MPLS network is called a label switched path (LSP). An LSP is a bidirectional path that specifies the transmission direction of data flows.

A. TRUE
B. FALSE

Antwort: B

65. Frage
On the OSPFv3 network shown in the figure, area 1 is a common area. R2 generates an Inter-Area-Prefix- LSA to describe the routes of a network segment in the area. Such an LSA exists in both area 0 and area 1.

A. TRUE
B. FALSE

Antwort: A

Begründung:
Comprehensive and Detailed In-Depth Explanation:To determine whether the statement is true or false, we need to analyze the OSPFv3 topology, the role of area types, and the behavior of Inter-Area-Prefix-LSAs. Let' s break it down step by step:
* Understanding the OSPFv3 Topology and Area Types:
* The figure shows three routers (R1, R2, and R3) connected in an OSPFv3 network. R1 and R2 are in Area 0 (the backbone area), while R2 and R3 are in Area 1 (a common area, also known as a standard or regular area).
* R2 is an Area Border Router (ABR) because it connects Area 0 and Area 1. ABRs are responsible for summarizing and advertising routes between areas.
* What is a Common Area in OSPFv3?:
* A "common area" in OSPFv3 refers to a standard or regular OSPF area, as opposed to special areas like Stub, Totally Stubby, Not-So-Stubby Area (NSSA), or Totally NSSA. Common areas allow all types of LSAs, including inter-area, intra-area, and external LSAs, to be flooded within the area, except for restrictions in special area types.
* Since Area 1 is described as a "common area," it behaves like a standard OSPF area, allowing the full exchange of LSAs, including Inter-Area-Prefix-LSAs.
* Role of Inter-Area-Prefix-LSA (Type 3 LSA in OSPFv3):
* Inter-Area-Prefix-LSAs (Type 3 LSAs in OSPFv3) are used by ABRs to advertise prefixes from one area to another. These LSAs are critical for inter-area routing, allowing routers in one area to learn about networks in other areas.
* In this case, R2, as an ABR, generates Inter-Area-Prefix-LSAs to describe routes (network segments) in Area 1 and advertises them into Area 0. Conversely, R2 also receives Inter-Area- Prefix-LSAs from Area 0 (via R1) and advertises them into Area 1.
* Does the Inter-Area-Prefix-LSA Exist in Both Area 0 and Area 1?:
* Yes, Inter-Area-Prefix-LSAs exist in both areas because R2, as an ABR, floods these LSAs into both Area 0 and Area 1. Specifically:
* R2 generates Inter-Area-Prefix-LSAs for network segments in Area 1 and advertises them into Area 0, where R1 (in Area 0) can receive and process them.
* Similarly, R2 receives Inter-Area-Prefix-LSAs for network segments in Area 0 (from R1) and advertises them into Area 1, where R3 (in Area 1) can receive and process them.
* Since Area 1 is a common area (not a stub or NSSA), it allows Inter-Area-Prefix-LSAs to be flooded within the area, ensuring that routers like R3 can learn about routes in Area 0, and routers like R1 can learn about routes in Area 1.
* Verifying the Statement:
* The statement claims that R2 generates an Inter-Area-Prefix-LSA to describe the routes of a network segment in Area 1, and such an LSA exists in both Area 0 and Area 1. This is accurate because:
* R2, as an ABR, generates Inter-Area-Prefix-LSAs for Area 1's network segments and floods them into Area 0.
* R2 also receives and floods Inter-Area-Prefix-LSAs from Area 0 into Area 1.
* Therefore, Inter-Area-Prefix-LSAs describing routes in Area 1 exist in both Area 0 and Area 1, making the statement true.
* Conclusion:
* The statement is true because Inter-Area-Prefix-LSAs generated by R2 for Area 1's network segments are flooded into both Area 0 and Area 1, and Area 1, being a common area, allows these LSAs to exist within it.
References to HCIP-Datacom-Advanced Routing & Switching Technology Documents:
* HCIP-Datacom-Advanced Routing & Switching Technology V1.0, Section on OSPFv3: OSPF Area Types, Inter-Area Routing, and LSA Types (specifically Inter-Area-Prefix-LSA, Type 3 LSA).
* HCIP-Datacom-Advanced Routing & Switching Technology V1.0, Chapter on OSPF Routing Protocols: ABR Behavior, Common Areas, and LSA Flooding Mechanisms.

66. Frage
If the display ospfv3 peer verbose command is run to check OSPFv3 neighbor information, the command output contains information such as the peer router ID, global unicast address of the peer interface, and neighbor status.

A. TRUE
B. FALSE

Antwort: A

67. Frage
From the user's point of view, any phenomenon that affects the business can be defined as a fault.

A. False
B. True

Antwort: B

68. Frage
......

Manchmal muss man mit große Menge von Prüfungsaufgaben üben, um eine wichtige Prüfung zu bestehen. Die Huawei H12-831_V1.0 von uns hat diese Forderung gut erfüllt. Und mit den fachlichen Erklärungen können Sie besser die Antworten verstehen. Die Demo der Huawei H12-831_V1.0 von unterschiedlichen Versionen werden von uns gratis angeboten. Probieren Sie mal und wählen Sie die geeignete Version für Sie! Mit unserer gemeinsamen Arbeit werden Sie bestimmt die Huawei H12-831_V1.0 Prüfung erfolgreich bestehen!

H12-831_V1.0 Online Prüfungen: https://www.zertpruefung.de/H12-831_V1.0_exam.html